Secure Payments
Shipping And Delivery Information
Orders are processed within 12-24 hours. Delivery within NCR takes 3-4 days. For Luzon areas, it takes 6-8 days. Lastly, for Visayas and Mindanao areas delivery takes 8-10 days.
- V-Belt Extend
- Part No: V10X1075
- Material: Polychloropren (neoprene)
- Colour: Black
- Width (mm): 10
- Length (mm): 1075
- Outer Length (mm): 1083
- Rotation angle (°): 36
- Qty: 1pc
- Fibre loaded rubber material provides excellent heat and wear resistance.
- Molded notch construction provides reduced bending stresses around small pulleys.
- Form grinding provides a smooth contact point between the belt surface and the pulleys.
- Suitable with:
- HYUNDAI H100
- Diesel 2.6L/58KW 2.6 D D4BB HR Rear-Wheel Drive Platform/Chassis (01/04-on)
- Diesel 2.5L/74KW 2.5 TD 4D56-T HR Rear-Wheel Drive Platform/Chassis (11/06-on)
- KIA PREGIO
- Diesel 2.5L/69KW 2.5 D D4BH Rear-Wheel Drive Bus (08/95-09/04)
- Diesel 2.5L/69KW 2.5 TCi D D4BH TB Rear-Wheel Drive Van (09/02-on)
- MITSUBISHI
- G-WAGON
- Diesel 2.5L/98KW 2.5 TD (K94W) 4D56-T K7_,K9_,PA All-wheel Drive Closed Off-Road Vehicle (08/03-on)
- L200
- Diesel 2.5L/55KW 2.5 D (K64T) 4D56 (8V) K34T,K5_T,K6_T,K7_T,MK,MK Rear-Wheel Drive Ute (06/96-12/07)
- Diesel 2.5L/73KW 2.5 TD 4WD (K74T) 4D56-TD K34T,K5_T,K6_T,K7_T,MK,MK All-wheel Drive Ute (06/96-12/07)
- Diesel 2.5L/66KW 2.5 TD (K64T) 4D56-T K34T,K5_T,K6_T,K7_T,MK,MK Rear-Wheel Drive Ute (08/01-11/05)
- Diesel 2.5L/85KW 2.5 TD 4WD (K74T) 4D56-T K34T,K5_T,K6_T,K7_T,MK,MK All-wheel Drive Ute (09/01-12/07)
- L200 / STORM
- Diesel 2.5L/89KW 2.5 DI-D 4x4 (K74T) 4D56-T K34T,K5_T,K6_T,K7_T,MK,MK All-wheel Drive Ute (01/04-12/07)
- L300
- Diesel 2.5L/52KW 2.5 (L039P) 4D56 (8V) L03_P Rear-Wheel Drive Platform/Chassis (01/05-06/07)
- MONTERO SPORT
- Diesel 2.5L/73KW 2.5 TD (K94W) 4D56-T K7_,K9_,PA All-wheel Drive Closed Off-Road Vehicle (11/98-on)
- STRADA
- Diesel 2.5L/100KW 2.5 DI-D (KA4T) 4D56-HP KA_T,KB_T,ML,ML,MN,MN Rear-Wheel Drive Ute (11/05-12/15)
- ROVER 800
- Petrol 2.7L/124KW 827 24V I/SI Cat (RS) C 27 A1 XS Front-Wheel Drive Hatchback (01/92-02/99)
- Petrol 2.7L/124KW 827 SI/Sterling Catalytic-Conv (XS) C 27 A1 XS Front-Wheel Drive Sedan (02/88-02/99)
- Petrol 2.7L/130KW 827 SI/Sterling (XS) C 27 A2 XS Front-Wheel Drive Sedan (02/88-12/91)
- Petrol 2.7L/124KW 827 Vitesse Catalytic-Conv (XS) C 27 A1 XS Front-Wheel Drive Hatchback (10/88-12/91)
- Petrol 2.7L/130KW 827 Vitesse/SLI C 27 A2 XS Front-Wheel Drive Hatchback (10/88-12/91)
- TOYOTA TERCEL
- Petrol 1.3L/48KW 1.3 (AL20, AL11) 2A _L1_,_L2_ Front-Wheel Drive Hatchback (03/79-01/88)
- Petrol 1.3L/48KW 1.3 (AL20_) 2A AL1_,AL2_ Front-Wheel Drive Sedan (03/79-10/85)
- Petrol 1.5L/52KW 1.5 (AL25) 3A AL2_ All-wheel Drive Wagon (08/82-12/88)
- VOLKSWAGEN TRANSPORTER
- Petrol 2.5L/81KW 2.5 AEU,AAF,AEN,ACU 70B,70C,70J,70K,7DB,7DC,7DJ,7DK Front-Wheel Drive Bus (09/90-06/03)
- Diesel 2.4L/57KW 2.4 D Syncro AAB 70B,70C,70J,70K,7DB,7DC,7DJ,7DK All-wheel Drive Bus (10/92-09/98)
- Caution:
- Before any service work on the belt is begun to be sure that the motor or engine is switched off and cannot be started.
- Important:
- Check for worn tensioners and idler pulleys. This is the best time to replace these part these parts if needed.
- Belt Removal:
- Loosen adjustment or pivot bolts.
- Move adjustment unit to minimum position.
- Remove belt.
- Belt Installation:
- Place new belt looseley on pulleys. Do not pry onto pulleys.
- Tension belt according to manufacturer's instruction.
- Run drive 5 minutes and retension. Belts must be tight enough to prevent slippingwhen drive is fully loaded.
- Reminders :
- Kindly note that actual product color may vary from the images shown.
- Lighting conditions at the time the photo was taken can also affect an image's color.
- For more questions about this product, please don't hesitate to message us.
- Thank you and happy shopping!
Return and Exchange Policy
- Replacement of unit due to change of mind is not allowed. Only defective goods can be returned or exchanged.
- If the item is defective, kindly send us an email at customerservice@blade.ph and a Customer Service Representative will get in touch with you to investigate and provide you with instructions on the matter.
- Please note that the item must be in its original delivery condition and sent back to us with prepaid shipping charges and insured for the full purchase price, with original copy of Sales Invoice. Shipping and handling charges are non-refundable. Blade may charge administrative and handling charges depending on the circumstances of the return.
Item Warranty
- Guarantee is given to customer’s purchased unit by the manufacturer usually for any repair or replacement of parts for a stated time period and conditions.
- Kindly ensure to keep the Official Sales Invoice for warranty purposes.
- In case the item purchased online has a problem, customer may contact the Customer Service Hotline at (+632) 927-7777 or email us at customerservice@blade.ph for proper instruction.