Secure Payments
Shipping And Delivery Information
Orders are processed within 12-24 hours. Delivery within NCR takes 3-4 days. For Luzon areas, it takes 6-8 days. Lastly, for Visayas and Mindanao areas delivery takes 8-10 days.
- Micro-V
- Part No: 6PK1230
- Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Colour: Black
- Number of ribs: 6
- Width (mm): 20
- Length (mm): 1230
- Qty: 1pc
- Lasts Longer - Lasts up to 50% longer than any retail belt on the market.
- Ultimate Dependability - Eliminates belt noise and premature failure by utilising materials like Aramid Fibre found in bullet proof vests and crack and heat resistant EPDM materials.
- Improves Component Performance – Compensates for worn and misaligned components in high kilometre vehicles through superior stability.
- Suitable with:
- TOYOTA
- ALTIS
- Petrol 1.6L/91KW 1.6 Dual VVTi (ZRE141, ZRE151) 1ZR-FE _E14_,_E14_,_E14_,_E14_,_E14_,_E15_ Front-Wheel Drive Sedan (01/07-07/14)
- Petrol 1.6L/90KW 1.6 VVTi (ZRE141_, ZRE151_) 1ZR-FE _E14_,_E14_,_E14_,_E14_,_E14_,_E15_ Front-Wheel Drive Sedan (07/10-05/14)
- Petrol 2L/107KW 2.0 (ZRE143) 3ZR-FE _E14_,_E14_,_E14_,_E14_,_E14_,_E15_ Front-Wheel Drive Sedan (07/10-06/13)
- Petrol 1.8L/103KW 1.8 VVTi (ZRE142) 2ZR-FBE,2ZR-FE _E14_,_E14_,_E14_,_E14_,_E14_,_E15_ Front-Wheel Drive Sedan (08/10-06/13)
- Petrol 1.8L/100KW 1.8 (ZRE142, ZRE152) 2ZR-FE _E14_,_E14_,_E14_,_E14_,_E14_,_E15_ Front-Wheel Drive Sedan (10/06-07/14)
- COROLLA
- Petrol 2L/107KW 2.0 VVT-i (ZRE173) 3ZR-FE _E18_,ZRE1_ Front-Wheel Drive Sedan (01/14-06/19)
- Petrol 1.6L/97KW 1.6 VVTi (ZRE210) 1ZR-FAE,1ZR-FE _E21_ Front-Wheel Drive Sedan (01/19-on)
- Petrol 1.6L/90KW 1.6 VVTi (ZRE210) 1ZR-FAE,1ZR-FE _E21_ Front-Wheel Drive Sedan (01/19-on)
- Petrol 1.6L/90KW 1.6 (ZRE171, ZRE181) 1ZR-FE _E18_,ZRE1_ Front-Wheel Drive Sedan (06/13-12/18)
- Petrol 1.8L/111KW 1.8 (ZRE142) 2ZR-FE _E14_,_E14_,_E14_,_E14_,_E14_,_E15_ Front-Wheel Drive Sedan (08/10-11/13)
- Petrol 2L/116KW 2.0 VVTi (ZRE143) 3ZR-FE _E14_,_E14_,_E14_,_E14_,_E14_,_E15_ Front-Wheel Drive Sedan (08/10-11/13)
- COROLLA ALTIS
- Petrol 1.8L/103KW 1.8 Dual VVTi (ZRE172, ZRE182) 2ZR-FBE,2ZR-FE _E18_,ZRE1_ Front-Wheel Drive Sedan (01/14-12/18)
- Petrol 1.6L/90KW 1.6 BiFuel (ZRE171) 1ZR-FE _E18_,ZRE1_ Front-Wheel Drive Sedan (06/13-12/18)
- Petrol 2L/105KW 2.0 VVT-i (ZRE173_) 3ZR-FE _E18_,ZRE1_ Front-Wheel Drive Sedan (10/13-12/18)
- Petrol 1.8L/111KW 1.8 VVT-i (ZRE172) 2ZR-FE _E18_,ZRE1_ Front-Wheel Drive Sedan (12/13-12/18)
- WISH
- Petrol 1.8L/98KW 1.8 4WD (ZGE25_) 2ZR-FAE _E2_ All-wheel Drive MPV (04/09-03/12)
- Petrol 1.8L/106KW 1.8 (ZGE20_) 2ZR-FAE _E2_ Front-Wheel Drive MPV (04/09-10/19)
- Petrol 2L/116KW 2.0 (ZGE21_, ZGE22_) 3ZR-FAE _E2_ Front-Wheel Drive MPV (04/09-10/19)
- Petrol 2L/107KW 2.0 (ZGE21_, ZGE22_) 3ZR-FAE,3ZR-FE _E2_ Front-Wheel Drive MPV (04/09-on)
- Petrol 2L/104KW 2.0 (ZGE21R) 3ZR-FE _E2_ Front-Wheel Drive MPV (11/09-on)
- Caution:
- Before any service work on the belt is begun to be sure that the motor or engine is switched off and cannot be started.
- Important:
- Check for worn tensioners and idler pulleys. This is the best time to replace these part these parts if needed.
- Belt Removal:
- Loosen adjustment or pivot bolts.
- Move adjustment unit to minimum position.
- Remove belt.
- Belt Installation:
- Place new belt loosely on pulleys. Do not pry onto pulleys.
- Tension belt according to manufacturer's instruction.
- Run drive 5 minutes and retension. Belts must be tight enough to prevent slipping when drive is fully loaded.
Return and Exchange Policy
- Replacement of unit due to change of mind is not allowed. Only defective goods can be returned or exchanged.
- If the item is defective, kindly send us an email at customerservice@blade.ph and a Customer Service Representative will get in touch with you to investigate and provide you with instructions on the matter.
- Please note that the item must be in its original delivery condition and sent back to us with prepaid shipping charges and insured for the full purchase price, with original copy of Sales Invoice. Shipping and handling charges are non-refundable. Blade may charge administrative and handling charges depending on the circumstances of the return.
Item Warranty
- Guarantee is given to customer’s purchased unit by the manufacturer usually for any repair or replacement of parts for a stated time period and conditions.
- Kindly ensure to keep the Official Sales Invoice for warranty purposes.
- In case the item purchased online has a problem, customer may contact the Customer Service Hotline at (+632) 927-7777 or email us at customerservice@blade.ph for proper instruction.